Size and Weight
This 16.5" wand is suited for both short and long string wand spinners as well as double wanding and potentially a two wand meteor setup (known as a "KittenWrench")
This wand is made of steel, making it very strong and resistant to bending.

Wicks
This wand has 1.5” wicks on both top and bottom. This ensures that the wand’s weight balance stays consistent, unlike how most single-wicked wands shift their balance as fuel weight burns away. The wicks burn for approximately 2-2:30 minutes.*

Minimized Exposed Metal
Most severe equipment burns come from searing-hot exposed metal, not from the wicks. To minimize exposed metal, these wand wicks are attached with recessed screws. The wand’s body is covered with a colored silicone wrap that diffuses heat and allows you to safely touch the wand within an inch of the burning wicks without being burned. We do not recommend doing contact work with this wand unless properly clothed, given how close the wicks would be to your body/skin.

Leash
Shadow Cord is a soft and durable Leviwand leash, made from a material used extensively by NASA. This fine cord has a tensile strength of 200lbs, with the flame resistance of Kevlar and three times its abrasion resistance. This ensures that the wand’s flames won’t easily burn through the leash, and that it won’t get worn down sliding through the wand’s center hole.

This wand comes with a short-string leash attached. If you are a long-string wander, you can add an extra 20ft of Shadow Cord to your order to make your wand leash length perfect for your style.

If you wish to restring your Leviwands, we recommend using a Double Fisherman's Knot. Click here for an animated guide on this knot.

Handle
There are four different handle options for Leviwands:

1) A loop made out of Shadow Cord. You can feed the loop between two fingers and then fold the loop down around the two fingers to tighten it in place, or wrap it around your arm or wrist.

2) A leather fingerloop. This cinches around a finger, and people generally find it more comfortable than a Shadow Cord loop.

3) A PomGrip. This is a small silicone knob that fits comfortably in the hand. Some creative wand spinners have begun playing around with Leviwand tosses (much like one would do poi tosses with ball handles), and PomGrips allow for that.

4) UltraKnobs made by UltraPoi, are rechargeable RGB LED silicone handles. This knob can be set to any of the colors of the rainbow, as well as strobe patterns that create intricate light trails while you spin.

* Burn times are estimated based on recorded burns using pure "white gas" / Coleman's Liquid Camp Fuel. Actual burn times may vary based on individual spinning style, length of fuel soak, and other factors.