Size and Weight
This 28" wand is suited for both short and long string wand spinners.

This carbon fiber wand has an average weight of 4.2 oz and is made with 3/8" wide carbon fiber tubing. The carbon fiber makes the wand extremely hard to break and guarantees it won't bend. Because the wand is so light weight, it extremely responsive to sharp changes in direction. This weight / style is the preferred long string wand style, and is a favorite with fast style short string spinners.

Wicks
This wand has 2” wicks on both top and bottom. This ensures that the wand’s weight balance stays consistent, unlike how most single-wicked wands shift their balance as fuel weight burns away. The wicks burn for approximately 3:00 minutes.* There is a 1 inch protective sleeve below the wick, that prevents the fire from damaging the carbon fiber (as CF can not take direct flame level heat).

Minimized Exposed Metal
Most severe equipment burns come from searing-hot exposed metal, not from the wicks. To minimize exposed metal, these wand wicks are attached with recessed screws. The wand’s body is covered with a colored silicone wrap that diffuses heat and allows you to safely touch the wand within an inch of the burning wicks without being burned. This silicone wrap also provides a grippy surface that allows you to do contact staff movements like fishtails with your wand.

Leash
Shadow Cord is a soft and durable Leviwand leash, made from a material used extensively by NASA. This fine cord has a tensile strength of 200lbs, with the flame resistance of Kevlar and three times its abrasion resistance. This ensures that the wand’s flames won’t easily burn through the leash, and that it won’t get worn down sliding through the wand’s center hole.

This wand comes with a short-string leash attached. If you are a long-string wander, you can add an extra 20ft of Shadow Cord to your order to make your wand leash length perfect for your style.

If you wish to restring your Leviwands, we recommend using a Double Fisherman's Knot. Click here for an animated guide on this knot.

Handle
There are four different handle options for Leviwands:

1) A loop made out of Shadow Cord. You can feed the loop between two fingers and then fold the loop down around the two fingers to tighten it in place, or wrap it around your arm or wrist.

2) A leather fingerloop. This cinches around a finger, and people generally find it more comfortable than a Shadow Cord loop.

3) A PomGrip. This is a small silicone knob that fits comfortably in the hand. Some creative wand spinners have begun playing around with Leviwand tosses (much like one would do poi tosses with ball handles), and PomGrips allow for that.

4) UltraKnobs made by UltraPoi, are rechargeable RGB LED silicone handles. This knob can be set to any of the colors of the rainbow, as well as strobe patterns that create intricate light trails while you spin.

* Burn times are estimated based on recorded burns using pure "white gas" / Coleman's Liquid Camp Fuel. Actual burn times may vary based on individual spinning style, length of fuel soak, and other factors.